Firmware release notes for Artome devices.
4.6.3
9.4.2026
Audio
- Ability to set XLR outputs to mono/stereo via Artome Connect app
- Ability to disable volume adjustment chimes via Artome Connect app
- Chimes volume lowered by 5dB
Andere
- Bluetooth remote battery level is shown in Artome Connect app
- Bluetooth remote now wakes up faster
4.4.0
18.11.2025
Bluetooth
- Added support for multiple Bluetooth pairs. 4 Bluetooth pairs are now saved to the device memory.
Security
- Factory reset is now limited to be started within 2 minutes from plugging in the power cable.
- Added ability to to lock the physical button panel via the Artome Connect app.
Audio
- Added max volume control to the Artome Connect app.
- Input mode selector timeout is now 60 seconds.
- Balanced input level control is now adjustable from The Artome Connect app also when inputs are set to mic mode.
- Hybridock USB out audio level is not anymore affected by the mic gain knobs.
- The Hybridock USB audio now has a separate volume control in the Artome Connect app.
Bug and stability fixes
- Fixed a bug where Artome X20 startup test sometimes timed out before the projector was found.
- Fixed a bug where sometimes Artome X20 audio started clipping when it was used in very high volume.
- Improvements to Bluetooth pairing error handling.
4.1.1
10.9.2025
Bug and stability fixes
- Fixed a bug where the projector provisioning gets stuck due to administrator password setup prompt during the first startup on Panasonic projectors.
4.0.8
26.6.2025
Allgemein
- Support for new product Artome X10M
- Support for new product PT-VMZ-AVCART
Image
- Focus adjustment mode for units with Panasonic VMZ-ST projectors
Audio
- Artome X20 bass level adjusted to match other Artome products
Bluetooth
- Pairing mode is now closed automatically as soon as Artome Remote is paired.
3.7.2
21.5.2025
Audio
- Input mode selector with Artome Remote
Allgemein
- Added ability set a friendly name for the device. The name is also shown as the Bluetooth name.
Bug and stability fixes
- Fixed a bug where setting audio startup volume from Artome Connect app also changed device volume.
- Fixed a bug where audio amplifier sometimes failed to start if Artome hardware was powered before the projector.
- Fixed a reprovisioning loop with some Epson PU-series projectors.
3.6.3
21.2.2025
Audio
- Added treble control to the Artome Connect app
Allgemein
- Device controls and audio is now enabled already during the projector warmup state
Security
- Added ability to disable the projector menu button from the Artome Remote. For Artome M10 the projector menu button is also disabled.
- Added ability to set Bluetooth pairing PIN
- Added abbility to set settings menu PIN to limit access to the Artome Connect app settings menu
Bug and stability fixes
- Improvements to projector provisioning
- Fixed a bug where in rare occasions the device audio remained muted when a device was turned on
3.3.3
3.12.2024
Audio
- Artome volume controls rework
- Added chimes for volume adjustment and mute
- Added input mode mic/line selector to Artome Connect app
Power
- Added USB hub power output controls to Artome Connect app
Bug and stability fixes
- Fixed a bug where Artome X20 was reported to be not loud enough.
3.2.0
7.10.2024
Allgemein
- Support for new product Artome X20 (HW23)
Image
- Image settings can be adjusted with Artome Remote by long-pressing Freeze button
- Artome S-series / M10: Image Lift mode
- Artome X20: Lens menu (focus, lens shift, zoom)
3.0.0
25.9.2024
Allgemein
- Added support for HW232 variant
Audio
- Added aux input gain control for HW232 devices in the Artome Connect app
2.1.0
20.8.2024
Audio
- Added default startup volume to the Artome Connect app
- Added bass level control to the Artome Connect app
- Added audio out level to the Artome Connect app
- Added internal speaker mute to the Artome Connect app
- Added audio settings reset feature to the Artome Connect app
Bluetooth
- Added support for the Artome Remote
Allgemein
- Added factory reset functionality
2.0.1
15.4.2024
Allgemein
- Support for new product Artome M10 (HW23)
- Added cooldown mode. The chassis fans stay on for a while after the projector is turned off.
Image
- Added image reset feature
1.0.0
6.3.2024
Allgemein
- Support for new product Artome S1
Audio
- Added audio only mode