Firmware release notes for Artome devices.
4.6.3
9.4.2026
Audio
- Ability to set XLR outputs to mono/stereo via Artome Connect app
- Ability to disable volume adjustment chimes via Artome Connect app
- Chimes volume lowered by 5dB
Bluetooth
- Remote controller battery level is shown in Artome Connect app
- Remote controller now wakes up faster
4.4.0
18.11.2025
Bluetooth
- Added support for multiple Bluetooth pairs. 4 Bluetooth pairings are now saved to the device memory.
Security
- Factory reset needs to be initiated within 2 minutes from plugging in the power cable.
- Added ability to lock the physical button panel via Artome Connect app.
Audio
- Added max volume control to Artome Connect app.
- Balanced input level control is now adjustable from Artome Connect app also when inputs are set to mic mode.
- Hybridock USB out audio level is no longer affected by the mic gain knobs.
- Hybridock USB audio now has a separate volume control in Artome Connect app.
Controls
- Input mode selector timeout is now 60 seconds.
Bug and stability fixes
- Fixed a bug where Artome X20 projector was not always recognized.
- Improvements to Artome X20 audio
4.1.1
10.9.2025
Bug and stability fixes
- Fixed a bug where the projector provisioning gets stuck due to administrator password setup prompt during the first startup on Panasonic projectors.
4.0.8
26.6.2025
General
- Support for new product Artome X10M
- Support for new product PT-VMZ-AVCART
Image
- Focus adjustment mode for units with Panasonic VMZ-ST projectors
Audio
- Artome X20 bass level adjusted to match other Artome products
Bluetooth
- Pairing mode is now closed automatically as soon as Artome Remote is paired.
3.7.2
21.5.2025
Audio
- Input mode selector with Artome Remote
General
- Added ability to set a friendly name for the device. The name is also shown as the Bluetooth name.
Bug and stability fixes
- Adjusting startup volume from Artome Connect app lo longer changes device’s current volume.
- Fixed a bug where speakers sometimes remained muted after turning on the device.
- Fixes to projector provisioning with Artome X20 projectors.
3.6.3
21.2.2025
Audio
- Added treble controls to Artome Connect app
General
- Device controls and audio are now enabled already during the projector warmup state
Security
- Added ability to disable the projector menu button of Artome Remote from Connect app
- Added ability to set Bluetooth pairing PIN from Connect app
- Added ability to set settings menu PIN to limit access to Artome Connect app settings menu
3.3.3
3.12.2024
Audio
- Artome volume controls rework Volume controls of Artome devices
- Added chimes for volume adjustment and mute
- Added input mode mic/line selector to Artome Connect app
Power
- Added USB hub power output controls to Artome Connect app
Bug and stability fixes
- Artome X20 audio improvements
3.2.0
7.10.2024
General
- Support for new product Artome X20 (HW23)
Image
- Image settings can be adjusted with Artome Remote by long-pressing Freeze button
- Artome S-series / M10: Image Lift mode
- Artome X20: Lens menu (focus, lens shift, zoom)
3.0.0
25.9.2024
General
- Added support for HW232 variant
Audio
- Added aux input gain control for HW232 devices in the Artome Connect app
2.1.0
20.8.2024
Audio
- Added default startup volume to Artome Connect app
- Added bass level control to Artome Connect app
- Added audio out level to Artome Connect app
- Added internal speaker mute to Artome Connect app
- Added audio settings reset feature to Artome Connect app
Bluetooth
- Added support for Artome Remote
General
- Added factory reset functionality
2.0.1
15.4.2024
General
- Support for new product Artome M10 (HW23)
- Added cooldown mode. The chassis fans stay on for a while after the projector is turned off.
Image
- Added image reset feature
1.0.0
6.3.2024
General
- Support for new product Artome S1
Audio
- Added audio only mode