Bildhöhe anpassen
These instructions vary between models. Recognizing Your Product Instructions how you can adjust the image height of your Artome product. The adjustments vary depending on the device model. Image Lift function raises the projected image digitally by shrinking it from the bottom up. Note that if you compensate the smaller image by moving the device […]
Bildfokus anpassen
These instructions vary between models. Recognizing Your Product Image focus might need adjusting when Artome device is moved and the projection distance changes. Artome S-series Models without side latch Models with side latch Artome M10 Artome X10 Artome X20
Im Nur-Audio-Modus
Diese Funktion wird von HW23x-Geräten unterstützt. Erkennen Ihres Produkts Der Audio-Only-Modus ermöglicht die Verwendung von Artome als Audiogerät, ohne dass der Projektor eingeschaltet bleiben muss. Audio-Only-Modus Sie können die Mikrofone, USB-Audio und das HDMI-Audio Ihres Artome-Geräts verwenden, indem Sie diese Anweisungen befolgen. HW20-Geräte Sie können Mikrofone und [...]
Artome Remote koppeln
Diese Funktion wird von HW23x-Geräten unterstützt. Produkt erkennen Artome Fernbedienung Kopplungsanweisungen. Beachten Sie, dass alle mit einem Gerät gelieferten Fernbedienungen bereits ab Werk gekoppelt sind. Anweisungen Zusätzliche Informationen Bei Problemen mit dem Kopplungsvorgang setzen Sie die Batterien der Fernbedienung neu ein und beginnen Sie erneut. Wenn die Probleme weiterhin bestehen, führen Sie einen Neustart Ihres Artome-Geräts durch. Nur […]
Geräteinformationen
You can change your device info with the Artome Connect app. The device info settings are located in the settings tab. The device info is saved to the device memory and shown to anyone connecting to the device. Device Name Give your device a friendly name to recognize the device more easily. This name is […]
Sicherheitseinstellungen
Artome Connect has options to enhance the security of your Artome device. These settings are located in the Settings tab. Projector Menu Lock This setting disables access to the projector menu by disabling the menu button of the Artome Remote. Additionally, this setting disables the physical buttons of a projector for some projector models. Button […]
USB-Einstellungen
Artome Connect app allows changing the Artome Hybridock audio interface and the USB hub behaviour. USB settings are located on the settings tab of the Artome Connect app. These settings are available for devices with USB connectors. USB-Hub Enable This settings allows you to control the Hybridock audio interface and the USB hub. When disabled, […]
Aktives Gerät ändern
Artome Connect stored multiple device pairs but can have active connection to one device at a time. This article explains how you can change between multiple paired Artome devices. Instructions
Koppeln eines neuen Geräts
Pair your Artome device with the Artome Connect for remote control, firmware updates, and extended settings. Artome Connect is compatible with Artome devices with HW231 and later. Recognizing Your Product Instructions Issues with pairing?
Lautstärkeregelungen von Artome-Geräten
This feature is supported by HW23x devices. Recognizing Your Product This feature was introduced in a firmware release. Updating device firmware Artome devices feature multiple audio inputs that are controlled with volume buttons and knobs, allowing you to adjust the balance between different audio sources. Basic audio controls HW23x with firmware 3.3.0 and later Volume […]