Använder endast ljudläge

Denna funktion stöds av HW23x-enheter. Erkänna din produkt

Audio Only mode allows you to use Artome as audio device without having to keep the projector on.

Audio Only Mode

You can use microphones, USB audio and HDMI audio of your Artome device by following these instructions.

1. Turn on Artome by pressing MAKT.
2. Optionally: connect your laptop to HDMI and press KÄLLA to select the desired input.
3. Activate Audio Only mode by long-pressing KÄLLA or press Audio Only button on the remote.
4. The projector will now turn off. POWER and SOURCE buttons light up.
5. Exit Audio Only mode by pressing POWER. To turn the projector back on, press KÄLLA.
   
   

HW20 Devices

You can use microphones and USB audio of your Artome device by following these instructions.

1. Turn on Artome by pressing POWER.
2. Connect USB cable to your computer or use the microphones.
3. Select Artome Hybridock as output device on your computer.
4. Press PAUSE button on your Artome to turn off the projector lamp.
   
   

Epson Power Settings

Epson projectors are set to turn off after 20 minutes if the projector is not used. You can disable this setting.

Artome M10: Menu > Operation > Sleep Mode: Off

Artome X20: Menu > Extended > Operation > Sleep Mode: Off