Justera bildfokus

These instructions vary between models. Erkänna din produkt

Image focus might need adjusting when Artome device is moved and the projection distance changes.

Artome S-series

Models without side latch

1. Open the front door and locate the projector cooling vent. .
2. Push the lever on top to open the vent.
3. Adjust until the image is clear.
   

Models with side latch

1. Open the side latch.
2. Push the lever on top to open the projector cooling vent.
3. Adjust until the image is clear.

Artome M10

1. Open the front door of the device.
2. The focus lever is positioned next to the projector’s physical buttons.
3. Adjust until the image is clear.
   

Artome X10

1.  Open the lens latch.
2. The focus lever is located around the projector lens.
   1. PT-VMZ-ST model projectors have motorized focus.
   2. Use projector buttons to adjust focus.
   3. Additionally long-press Artome FREEZE button to activate focus adjustment. Use VOL buttons to adjust.
3. Adjust until the image is clear.

Artome X20

1. Long-press FREEZE on Artome button panel or Artome remote to open image adjustment menu.
2. Press FREEZE button to cycle between different features: focus, zoom, lens shift.
3. Use the D-pad on the remote to adjust the values. Alternatively use the VOL buttons on Artome button panel. 
4. Adjust until the image is clear.
5. Exit the menu by cycling through the features with the FREEZE button.